Showing 15 of 313
Timpl has partnered with an EV battery manufacturing company and is seeking for a Production Engineer. Summary The Production Engineer I supports the distribution of resources in accordance with the production and shipment plan, helps ensure a safe workplace, and supports production activities by optimizing processes and equipment. This role monitors and improves production results, including yield, Overall Equipment Effectiveness (OEE), and output quantity. Working under the direction of senior engineering staff, the Production Engineer I partners with engineers, operators, Quality, and Production Management to troubleshoot equipment, resolve quality issues, and improve process performance. This is an entry-level engineering position with development opportunity into more advanced production engineering responsibilities. Responsibilities * Work with engineers and operators to troubleshoot machines on the production floor to support the highest achievable yield and OEE * Monitor and support management of production yield and Overall Equipment Effectiveness (OEE) * Check production progress against the production plan and provide feedback to the Production Management department when progress issues occur * Review non-conformance reports (NCRs), analyze quality issues, and support development and implementation of corrective actions * Support inventory management activities, including classification of good product and pending inventory * Improve production processes by creating and updating Standard Operating Procedures (SOPs) * Train operators on process procedures to ensure understanding and correct implementation on the production floor * Support internal and customer audits * Comply with all health, safety, environmental, and fire regulations * Follow established work instructions, standard operating procedures, and company policies * Participate in and complete all required training programs * Maintain regular and reliable on-site attendance * Maintain cleanliness at the work site in accordance with 5S3R Standards (Sort, Set in Order, Shine, Standardize, Sustain; Right Location, Right Quantity, Right Container) * Perform other duties as assigned Qualifications * Bachelor's degree in Engineering or a related technical field required, or equivalent relevant experience Experience * Minimum 1 year of experience in production technology, manufacturing engineering, or a related role required * Relevant internship, co-op, or undergraduate research experience in a manufacturing or industrial environment may be considered instead of full-time experience * Experience with yield analysis, OEE metrics, or process improvement activities preferred * Experience reviewing non-conformance reports or supporting corrective actions preferred * Knowledge of battery manufacturing processes is a plus * Demonstrated reliable work history and consistent attendance in prior employment Skills * Working knowledge of production processes, equipment, and manufacturing performance metrics * Six Sigma knowledge or exposure to structured problem-solving methodologies * Battery production knowledge preferred * Strong analytical and problem-solving skills with the ability to interpret yield, OEE, and quality data * Ability to troubleshoot production equipment in partnership with engineers and operators * Ability to create process documentation and train operators on standard work * Strong written and verbal communication skills * Strong attention to detail * Organizational and multitasking skills * Proficiency in Microsoft Office Suite, particularly Excel * Ability to work flexible hours as needed to support production operations Physical Requirements * Must be able to properly and regularly utilize the following PPE for periods of up to 12 hours: safety glasses, steel-toed shoes, nitrile gloves, ear protection, and cleanroom suit * Must be able to repeatedly lift, push, and pull materials or equipment for periods of up to 12 hours * Must be able to repeatedly stoop, twist, and bend for periods of up to 12 hours * Must be able to repeatedly reach overhead for periods of up to 12 hours * Must be able to stand, walk, and move throughout production areas for extended periods * Must be able to sit and/or stand for extended periods * Must be able to use hands and fingers to operate tools, equipment, and computer systems Work Environment * Work is performed within a manufacturing facility, including production, clean room, and office areas * Work may involve handling or working in proximity to hazardous materials and regulated industrial chemicals * Exposure to chemical vapors, dust, noise, moving machinery, or other controlled substances may occur depending on process assignment * Strict adherence to company safety policies and OSHA Hazard Communication requirements is mandatory * Employees must properly wear and maintain assigned personal protective equipment (PPE) at all times within designated areas * Required PPE may include respirators, chemical-resistant garments, gloves, eye protection, face shields, or other equipment determined by process and risk assessment * This position supports continuous manufacturing operations. Employees must be able and willing to work scheduled shifts, weekends, holidays, and overtime as business needs require, including support during production trials, shutdowns, and quality escalations
Timpl has partnered with an EV battery manufacturing company and is seeking for an Accountant II. Summary: The company has an immediate and exciting need for a treasury accounting associate. We are seeking a motivated and detail-oriented Treasury/Finance Analyst to support our regional treasury operations, with a focus on cash pooling, cash flow management, and mass payments. This position plays a key role in optimizing liquidity, ensuring the timely execution of payments, and enhancing treasury control processes across U.S. regions. Primary Responsibilities: * Cash Pooling Management * Monitor and manage daily cash positions across global bank accounts * Support the execution and administration of physical and notional cash pooling structures * Assist with internal funding strategies across subsidiaries and intercompany settlements * Cash Flow Management * Prepare and analyze short- and mid-term cash flow forecasts * Identify trends, variances, and opportunities to improve liquidity planning * Collaborate with U.S. subsidiaries to improve the accuracy of forecast inputs * Mass Payment * Ensure timely and accurate processing of domestic and international payments * Coordinate with AP, banks, and business entities to support scheduled disbursements * Maintain payment templates and authorizations in banking platforms * Review and validate documentation for new vendor banking details * Ensure compliance with internal controls and fraud prevention policies * Bank Reconciliation * Perform daily, weekly, and monthly reconciliations of bank accounts * Investigate and resolve discrepancies between bank records and internal ledgers * Work closely with Accounting to ensure timely and accurate financial reporting * Treasury Operations Support * Support treasury-related audits and compliance processes * Help with onboarding and administration of banking partners and platforms * Perform monthly financial closing duties * Cross-Functional Collaboration * Work closely with Finance, Accounting, AP, and international subsidiaries * Other duties as assigned Qualifications: * Bachelor’s degree in Finance, Accounting, Economics, or related field * 3-5 years of relevant treasury or corporate finance experience * Strong understanding of cash flow forecasting, cash management, bank reconciliation, and payment controls * Experience with global cash pooling and intercompany funding structures is preferred * Experience with SAP HANA is a plus. * Proficient in Microsoft Office products, especially Excel. * Strong communication and collaboration skills * Fluent in Korean and English (both written and verbal) * Positive, professional attitude and demonstrated effectiveness in accomplishing goals. * Excellent organizational, communication, and computer skills. * Effectively navigate systems to search for required information. * Attention to detail, numerical data entry, and duplicate entries. * Ability to prioritize when working on multiple tasks, meet deadlines, and actively communicate with all levels of the organization. * Ability to handle confidential documents and information in a discreet and professional manner. * Knowledge of Generally Accepted Accounting Principles (GAAP) preferred. Benefits Overview * 100% employer-paid Medical, Dental, and Vision premiums for you and your family * 100% employer-paid disability and life insurance * Generous Paid Time Off / Holidays * Opportunity to grow in a diverse work environment with a global company * 401 (k) retirement savings and planning with a generous company match
Timpl has partnered with an EV battery manufacturing company and is seeking for a Customs Specialist. Summary : In this role, you will serve as the Customs Compliance Specialist, responsible for overseeing import operations and managing relationships with external customs service providers. You will ensure full compliance with U.S. Customs and Border Protection (CBP) regulations, streamline import processes, and support the effective operation of the company's Foreign Trade Zone (FTZ). This position requires close coordination with customs brokers, freight forwarders, and internal stakeholders across supply chain, logistics, and trade compliance functions. This role requires being comfortable operating in a bilingual (English/Korean) business environment and demonstrate strong analytical, communication, and cross-functional collaboration skills. Responsibilities: * Oversee daily U.S. import customs clearance activities, ensuring full compliance with CBP and applicable government agency regulations * Serve as the primary point of contact for external customs brokers and freight forwarders; manage performance, address issues, and ensure timely and accurate customs processing * Administer and maintain Foreign Trade Zone (FTZ) operations, ensuring adherence to compliance requirements, including inventory control, recordkeeping, and reporting * Maintain accurate and up-to-date import documentation, including HTS classifications, country of origin determinations, and product valuation data * Partner with cross-functional teams—including logistics, procurement, and legal—to ensure import operations align with corporate objectives and compliance standards * Conduct regular audits of customs entries and broker activities to verify accuracy, identify discrepancies, and maintain regulatory compliance * Support internal and external audits, including CBP reviews and assessments from other relevant authorities * Identify opportunities for process optimization and cost reduction within customs and import operations, and lead implementation of best practices * Monitor and interpret updates to U.S. trade regulations, including CBP guidance, USMCA provisions, and other international trade agreements, to ensure proactive compliance * Perform other duties as assigned Qualifications and Requirements: * Minimum of 7 years of experience in customs compliance, import operations or international logistics, preferably in a manufacturing or production environment * Bachelor's Degree in general business, business administration, supply chain, logistics, engineering or related field required * English/Korean bilingual, a plus * Experience managing third-party customs brokers or logistics service providers * Experience with Foreign Trade Zone (FTZ) operations preferred * Licensed Customs Broker (LCB) certification preferred Skills : * Positive, dedicated attitude and demonstrated effectiveness to achieve given goals within due dates * Strong written and verbal communication skills * Demonstrates a strong sense of ownership by taking full responsibility for assigned tasks and ensuring their successful completion * Demonstrate teamwork and effectiveness in accomplishing goals * Ability to analyze data and prepare reports, statements, and projections * Ability to apply logical thinking to approach problem causes, along with a commitment to continuous improvement and the ability to generate ideas * Good capability to use MS-office and ERP systems (SAP, Oracle, etc.) * Knowledge of finance, accounting and customs * Knowledge in global sourcing skills, negotiations and bargaining * Ability to work flexible hours as needed to support related teams and work with headquarters and other global sites * Ability to travel domestic and internationally Why should you work here? 1. Growth - You are a self-driven individual who seeks and captures the opportunities for growth we offer by acquiring and solving tasks. 2. Challenge - You reach beyond expectations and strive for innovative methods beyond the traditional. 3. Action - You are driven, take initiative, can execute decisions with agility and fulfill tasks to completion. 4. Collaboration - You are enthusiastic about teamwork while respecting the different backgrounds and experience of colleagues.
Timpl has partnered with an EV battery manufacturing company and is seeking a Sr. Materials Management Specialist Job Summary: This role leads raw materials purchasing activities and manages key supplier-related processes to support operational and production needs. Responsibilities: * Lead raw materials purchasing activities and monitor supplier performance, pricing, delivery schedules, and material availability to support production requirements. * Develop and maintain strong relationships with suppliers and internal stakeholders to address material shortages, delivery delays, pricing concerns, and other supply-related issues. * Manage Vendor Managed Inventory (VMI) activities and monitor inventory coverage to help maintain an appropriate supply of raw materials. * Review material demand, purchasing requirements, and inventory trends to support purchasing decisions and help prevent shortages or excess inventory. * Evaluate transportation and logistics options and negotiate freight, transit, and other related costs to improve overall purchasing efficiency. * Manage escalated purchasing, shipment, and material availability issues that require cross-functional coordination or support from headquarters. * Prepare and provide regular updates and reports to headquarters in South Korea regarding raw materials purchasing status, supplier activity, inventory conditions, cost changes, and key issues requiring visibility or support. * Identify opportunities to improve raw materials purchasing processes, supplier performance, cost efficiency, and overall material availability. * Serve as a resource to team members by providing guidance on purchasing processes, supplier issues, material planning, and complex purchasing-related matters. * Perform other duties as assigned. Qualifications: * Bachelor’s degree in Supply Chain Management, Business Administration, Logistics, Operations, or a related field preferred. * 7+ years of experience in materials management, procurement, supply chain, purchasing, logistics, or a related field. * Demonstrated experience with supplier sourcing, negotiation, purchasing, and supplier relationship management. * Experience supporting raw materials purchasing within a manufacturing environment strongly preferred. * Ability to work on-site and maintain flexibility in work hours based on business needs and communication with global teams. Skills: * Strong supplier sourcing, negotiation, and relationship-management skills. * Strong analytical, problem-solving, and cost-management capabilities. * Ability to lead complex purchasing and materials-related activities with limited supervision. * Strong communication and cross-functional collaboration skills. * Proficiency in Microsoft Excel and experience with ERP, purchasing, or inventory-management systems. Why should you work here? * Growth - You are a self-driven individual who seeks and captures the growth opportunities we offer by acquiring and solving tasks. * Challenge - You reach beyond expectations and strive for innovative methods beyond the traditional. * Action - You are driven, take initiative, can execute decisions with agility, and fulfill tasks to completion. * Collaboration - You are enthusiastic about teamwork while respecting the different backgrounds and experience of colleagues.
Timpl has partnered with an EV battery manufacturing company and is seeking for a Process Engineer. Summary: The Process Engineer will provide support in optimizing productivity and sustainability of battery production through a high level of technical knowledge while ensuring stable mass production quality & PD improvement through recipe setting, spec alignment, process capability management, and high-quality defect improvement based on a technical understanding of the process and equipment Responsibilities: * Analyze productivity, yield, and overall equipment efficiency (OEE) of assigned process and department * Work with engineers and operators to troubleshoot machines to ensure highest yield and OEE * Analyze Quality issues to provide corrective actions * Improve production processes by creating various SOPs and training operators to ensure understanding and correct implementation to floor * Compliance with health/safety/environmental/ fire regulations * Spec. optimization and process conditions establishment * PFD: process flow diagram, PFMEA: process failure mode and effects analysis, CP: control plan * Chronic defect improvement activities * Production/development model dissemination and 4M change verification * Conduct internal and customer audits * Non-conformance report handling and improvement * Response to internal/external quality issues for the customer * Establishment and revision of PFD, PF Manual * Perform other duties as assigned Qualifications: * Bachelor’s Degree in Engineering or related field or equivalent, relevant experience * Must be available to work weekend/night shifts based on team’s needs * Ability to manage multiple priorities under pressure Experience: * 1-3+ years of experience in a production technology-related job preferred but not required * Experience in working in a fast-paced manufacturing environment * Previous experience working in an Asian HQ global company Skills: * Six Sigma knowledge * MS Office Suite * Written and verbal communication skills * Strong attention to detail * Organizational and multitasking skills
Timpl has partnered with an EV battery manufacturing company and is seeking for an Equipment Engineer. Summary As an Equipment Engineer I, you will support equipment breakdown analysis, program improvements, and design changes to increase overall efficiency and productivity. You will also provide controls training to the plant to share company-wide knowledge for company-specific equipment. Responsibilities: * Analyze OEE for frequency of breakdown and uptime for daily production. Report on OEE (micro-stops, BM, and yield; including 50% of time spent on this responsibility) * Support the completion of production work orders for technology-based (example: PLC program-based and redesign of line) and monitor equipment running post-improvement (including 35% of time spent on this responsibility) * Install new technology on the line (example: Installation of lasers) (including 15% of time spent on this responsibility) * Complete daily documentation and audits, as required by position * Follow established work instructions * Adhere to safety requirements at all times, including the use of proper PPE * Adhere to general and position-specific dress code requirements * Participate in and complete any training requirements * Regular and reliable on-site attendance is required * Perform other duties as assigned Qualifications: * Bachelor’s Degree in Engineering or related field or equivalent, relevant experience Experience: * 1 to 3+ years of experience with installation, modification, analysis, repair and testing of tools, machines and other equipment * Analysis of equipment breakdown data Skills: * Equipment designing programs 2D/3D * MS Office Suite * Collaboration * Internal/External Customer Interaction Physical: * Must be able to properly and regularly utilize the following PPE for a period of up to 12 hours * Safety glasses * Steel-toed shoes * Must be able to do the following repeatedly for a period of up to 12 hours * Lift/push/pull up to 50 pounds * Stoop, twist, bend * Reach overhead * Sit and/or stand
Summary: This role drives continuous quality improvement by gathering and analyzing data, maintaining standards, proposing solutions, and communicating with all stakeholders, from operators to high-level management. Responsibilities: * Oversee all quality inspections, including activity of off-shifts * Submit non-conformance reports if needed and follow up to ensure problems are corrected * Ensure accurate and standardized collection of data * Drive continuous improvement through data analysis and troubleshooting * Work independently and also in collaboration with others * Communicate with all stakeholders to ensure testing for changes in materials or dimensions occurs * Provide data as requested by other work-related teams, including HQ * Track/monitoring SPC data of all inspections and drive future changes * Write and maintain work instructions * Train operators when any changes occur * Maintain cleanliness at the work site in accordance with 5S3R Standards: 1. Sort, Set in order, Shine, Standardize, Sustain 2. Right Location, Right Quantity, Right Container * Perform other duties as assigned Qualifications: * Bachelor’s degree required or equivalent, relevant experience (MS preferred) * Chemical/Mechanical/Electrical/industrial Engineering / Computer science / or equivalent * Knowledge Lean Six Sigma (Greenbelt or black belt holder preferred) Experience: * 0 to 3+ years of experience in a quality engineer or related role * Experience with complete core documents, including control plans and process failure mode and effects analysis (PFMEA), helpful * Experience with statistical process control (SPC) preferred * Experience with 4M change process preferred Skills: * Comfortable working independently and with others * Results-oriented and perseverant * Critical thinking and problem-solving skills * Project and process management skills * Strong attention to detail * Technically proficient and motivated to continuously improve * MS Office Suite * Proficiency with Minitab preferred Benefits Overview • 100% employer-paid Medical, Dental, and Vision premiums for you and your family • 100% employer-paid disability and life insurance • Employer-supported childcare/babysitting programs • Generous Paid Time Off / Holidays • Opportunity to grow in a diverse work environment with a global company • 401 (k) retirement savings and planning with generous company match
Timpl has partnered with an EV battery manufacturing company and is seeking for an Equipment Engineer. JOB OVERVIEW This role involves supporting the operation, inspection, and basic maintenance of factory automation and logistics equipment, including conveyors, lifts, ASRS, AGVs, shuttles, stacker cranes, and stockers. Entry-level engineers will assist in ensuring stable operations and process efficiency while learning hands-on technical skills. KEY RESPONSIBILITIES * Operate and assist in managing factory automation and logistics equipment * Support equipment inspection, preventive maintenance, and troubleshooting * Assist in logistics process improvements and operational efficiency initiatives * Participate in equipment optimization and modification projects * Prepare and maintain operational and maintenance documentation * Collaborate with internal teams and external service providers QUALIFICATIONS * Bachelor’s degree in Mechanical, Electrical, Electronics, Automation, or related Engineering field * Basic knowledge of mechanical, electrical, and automation systems (PLC, motors, sensors, etc.) * Basic computer skills (MS Office, etc.) * Strong problem-solving skills and teamwork orientation * Responsible, proactive, and diligent work attitude * Willingness to learn and take initiative PREFERRED QUALIFICATIONS * Basic knowledge of factory automation or logistics equipment * Experience with AutoCAD or Siemens PLC * English-Korean bilingual skills
Timpl has partnered with an EV battery manufacturing company and is seeking for a Vision System Engineer. Job Purpose: Prevent quality issues in advance and maximize output (yield, OEE) by establishing an inspection system, managing inspection equipment maintenance, improving inspection equipment performance, and introducing new equipment. Job Responsibilities: * Compliance with health/safety/environmental/fire regulations - In case of emergency or danger, immediately stop work (e.g., in case of safety accidents such as worker injury (stenosis, cut, etc.) - Report singularity to Part Leader / Team Leader - Report accidents and risk factors to Part Leader / Team Leader - Implement safety improvements * Inspection machine PM management (inspection machine maintenance/performance management) - PM Planning (work content, period, personnel input, time required) - Technician PM work order and result check - Optimization of preventive maintenance items for inspection machine maintenance (PM Activity) - Establishment of inspection machine spare parts management system - Calibration to maintain inspection machine performance, management of MSA (Measurement Systems Analysis) * Inspector equipment improvement activities - Analyze and quantify equipment failure items (MTTR, MTBF) - Analyze the cause of equipment failure and derive improvement items - Review/derive and implement the predictive maintenance plan for the advancement of inspection equipment - Prevention of recurrence through failure analysis report creation, education/dissemination, and improvement for BM - Request and implement improvement on equipment makers for chronic problems * Improving/managing inspection machine accuracy and detection power - Monitoring inspection machine accuracy and detection power - Derivation/analysis of major factors for major inspection items - For process-borne issues, feedback to the production and equipment departments - For issues attributable to the inspection machine, improvement plans are derived and inspection conditions are optimized. - Continuous monitoring of the results of the measures * Establishment of an inspection information management system - Investment review and investment cost capex execution approval based on the investment process. - Inspection information management system development schedule management - Reviewing compliance with system ordering specifications and monitoring data I/F stabilization - System mass production transfer (to production department) and reporting (to supervisor) * Expansion of equipment and dissemination/application of new technologies for inspection - Investment review and investment cost capex execution approval based on the investment process. - Inspection machine set up schedule management - Verification of facility production capacity and stabilization of operation quality in accordance with SAT standards and facility order specifications - After completing the inspection machine set up, mass production is transferred and inspection report is carried out * Review/plan of Inspection machine Model development and Model change - Review of Model development (investment, schedule) - Investment review and investment cost capex execution approval based on the Model development process - Inspection machine H/W production and inspection recipe development schedule management - Model change recipe status management * Developing Technician skill improvement plan and implementing - Develop and run training courses to improve technician skills - Technician skill matrix management * Establishment and management of inspection machine standards (design, installation, operation) - Establishment and revision of inspection machine specifications and design standards - Establishment and revision of inspection machine IP * Establishment and revision of PFD, BM/PM/PD Manual (BM/PD Measures Guide) *PFD: Process Flow Diagram - Analyze the cause and check the action history for BM/PD issues - Enactment/revision of PFD and BM/PD manual on BM/PD issues - Production team sharing of BM/PM/PD Manual (EKMS, B-Lex registration) and inspection technician training * Reducing Overkilled NGs & Assuring for Quality by improving Inspection Performance (Undetected Real NGs, NG Leakage) - Improving Inspection Algorithm based on UC3 Inspection machine Algorithm sheet to enhance detection power : develop new algorithm, optimizing the given algorithm * Performing other duties assigned by the superior Qualifications: * Bachelor's Degree required in Electrical Engineering, Computer Science, Mechanical Engineering, or similar required * Machine Vision Engineering in a manufacturing or automotive engineering environment through an internship, co-op, entry level job role, or similar is preferred * Driven by objectives/KPI’s; consistent; and high personal ownership to uphold accountability to established standards and practices * Ability to use Logical thinking and decision-making by focusing on identifying root cause objectively using data, analyzing production results, and following proven problem-solving methods * Knowledge of Mechanical/technical curiosity and mindset * Commitment and desire to learn our complex battery manufacturing processes to become a go-to resource for technical problem-solving discussions * Effective communication and presentation skills * MS Office tool-based report writing and oral communication skills * Ability to work well with individuals and teams across the company to achieve team goals and targets * Good computer, Troubleshooting, Problem-solving, Critical thinking skills * Ability to work well in a team environment a requirement * Passion for work and respect for the other person
Position Summary: The Manager, General Affairs is responsible for leading General Affairs operations across a leading EV battery manufacturer's U.S. locations in Holland and Lansing, Michigan; Matteson, Illinois; and Phoenix, Arizona. This position leads General Affairs Specialists assigned to each location and establishes consistent processes, service standards, and support practices across the organization. The Manager oversees administrative and logistical support for Korean expatriates, Field Service Engineers (FSEs), HQ business travelers, Korean contractors, and other international personnel supporting U.S. operations. Key areas of responsibility include international employee and traveler support, contractor administration, visa and immigration-related coordination, and communication between U.S. operations and Korean headquarters. Professional bilingual proficiency in Korean and English is required to effectively support Korean-speaking personnel and serve as a liaison between U.S.-based teams and headquarters. Essential Responsibilities: * Lead General Affairs operations and establish consistent processes, procedures, and service standards across Holland, Lansing, Matteson, and Phoenix locations. * Oversee administrative and onsite support for Korean expatriates, FSEs, HQ business travelers, Korean contractors, and other international personnel assigned to or visiting U.S. operations. * Develop and maintain standardized processes for international employee support and HQ business traveler onboarding, orientation, and onsite support. * Oversee HQ business traveler coordination, including traveler information consolidation, visit schedule confirmation, onboarding and orientation, and response to general inquiries. * Oversee FSE assignment and onboarding support and coordinate with site stakeholders to ensure appropriate resources, access, training, and administrative support. * Manage administrative support for Korean contractors assigned to U.S. locations, including assignment information, documentation, site coordination, and communication with appropriate stakeholders. * Oversee catering and employee meal service operations, including vendor coordination, service quality monitoring, issue resolution, and continuous service improvement. * Oversee workplace and office administration activities, including space planning, seating and office layout management, common area management, office supplies, asset management, company mobile phone services, business card administration, and other General Affairs support. * Coordinate executive support, visitor support, and other administrative services as needed to support site and business operations. * Establish controls and tracking processes for visa, work authorization, assignment, passport, and other applicable expiration dates to support timely action and compliance. * Ensure immigration-related questions requiring legal interpretation or advice are appropriately referred to designated immigration counsel or authorized company representatives. * Serve as a primary liaison between U.S. operations, Korean headquarters, General Affairs, HR, site leadership, and other stakeholders regarding international employee, traveler, and General Affairs support. * Facilitate effective Korean-English communication between Korean-speaking employees, contractors, HQ stakeholders, and U.S.-based teams. * Establish and maintain appropriate records, trackers, procedures, and documentation for General Affairs activities. * Monitor General Affairs service needs, workload, and operational issues across locations and allocate resources or escalate issues as appropriate. * Partner with site leadership and other internal departments to identify General Affairs needs and implement effective solutions. * Ensure confidential employee, immigration, travel, and contractor information is handled and maintained appropriately. * Identify opportunities to improve General Affairs processes, service delivery, communication, and operational efficiency. * Support new site launches, expansions, special assignments, and other business initiatives requiring General Affairs coordination. * Maintain cleanliness at work-site in accordance with 5S3R Standards: * Sort, Set in order, Shine, Standardize, Sustain * Right Location, Right Quantity, Right Container * Perform other duties as assigned. Leadership Responsibilities: * Lead, coach, mentor, and develop General Affairs Specialists supporting each U.S. location. * Establish clear responsibilities, priorities, performance expectations, and service standards for the General Affairs team. * Manage team performance through regular feedback, goal setting, development planning, and performance management. * Assign and balance responsibilities across locations based on operational needs and workload. * Ensure General Affairs Specialists follow standardized processes while addressing location-specific business requirements. * Provide guidance and escalation support for complex employee, contractor, business traveler, FSE, and immigration-related administrative matters. * Promote effective collaboration and communication among General Affairs team members, site leadership, HR, HQ, and other business functions. * Identify staffing, training, and development needs to ensure appropriate General Affairs support across all locations Required Qualifications: * Bachelor's degree in Business Administration, Human Resources, International Business, Management, Communications, or a related field; or an equivalent combination of education and relevant experience. * 5+ years of progressively responsible experience in General Affairs, global mobility, expatriate support, human resources, international business operations, or a related function. * 2+ years of leadership, supervisory, or team management experience. * Professional bilingual proficiency in Korean and English, including verbal and written communication, required due to ongoing responsibilities supporting Korean-speaking employees, contractors, business travelers, and HQ stakeholders. * Experience supporting international employees, expatriates, business travelers, contractors, or global business operations. * Demonstrated experience developing or managing administrative processes across multiple teams or locations. * Ability to travel to supported U.S. locations as business needs require. Preferred Qualifications: * Experience working for a Korean-headquartered or multinational organization. * Experience managing General Affairs or administrative operations across multiple locations. * Experience supporting expatriates, FSEs, international assignments, or global mobility programs. * Experience coordinating employment-based immigration and visa processes with HR and external immigration counsel. * Experience managing or coordinating international contractors. * Experience working within a manufacturing environment. * Experience partnering directly with corporate or international headquarters. Skills & Competencies: * People leadership and team development * Korean-English bilingual communication * Cross-cultural communication * Multi-site operations management * Global mobility and expatriate support * Visa and immigration process coordination * FSE and international assignment support * Business travel coordination * Contractor administration * Process development and standardization * Stakeholder and relationship management * Problem-solving and escalation management * Organizational and time-management skills * Confidentiality and professional judgment * Project and priority management * Proficiency with Microsoft Office, including Excel, Outlook, PowerPoint, and Word Work Environment & Physical Requirements: * Work is primarily performed in office and manufacturing environments. * Regular interaction with employees, contractors, business travelers, site leadership, and global stakeholders. * Frequent use of computers, phones, and other standard office equipment. * Ability to sit, stand, and walk for extended periods as required. * Ability to navigate office and manufacturing areas while supporting employees and business operations. * Periodic travel to supported locations in Holland and Lansing, Michigan; Matteson, Illinois; and Phoenix, Arizona, as business needs require. * Occasional work or communication outside standard business hours may be required to support Korean HQ, FSEs, international employees, contractors, and business travelers. * Must comply with applicable safety requirements and use required personal protective equipment (PPE) when entering designated manufacturing areas. Position Summary: The Manager, General Affairs is responsible for leading General Affairs operations across a leading EV battery manufacturer's U.S. locations in Holland and Lansing, Michigan; Matteson, Illinois; and Phoenix, Arizona. This position leads General Affairs Specialists assigned to each location and establishes consistent processes, service standards, and support practices across the organization. The Manager oversees administrative and logistical support for Korean expatriates, Field Service Engineers (FSEs), HQ business travelers, Korean contractors, and other international personnel supporting U.S. operations. Key areas of responsibility include international employee and traveler support, contractor administration, visa and immigration-related coordination, and communication between U.S. operations and Korean headquarters. Professional bilingual proficiency in Korean and English is required to effectively support Korean-speaking personnel and serve as a liaison between U.S.-based teams and headquarters. Essential Responsibilities: * Lead General Affairs operations and establish consistent processes, procedures, and service standards across Holland, Lansing, Matteson, and Phoenix locations. * Oversee administrative and onsite support for Korean expatriates, FSEs, HQ business travelers, Korean contractors, and other international personnel assigned to or visiting U.S. operations. * Develop and maintain standardized processes for international employee support and HQ business traveler onboarding, orientation, and onsite support. * Oversee HQ business traveler coordination, including traveler information consolidation, visit schedule confirmation, onboarding and orientation, and response to general inquiries. * Oversee FSE assignment and onboarding support and coordinate with site stakeholders to ensure appropriate resources, access, training, and administrative support. * Manage administrative support for Korean contractors assigned to U.S. locations, including assignment information, documentation, site coordination, and communication with appropriate stakeholders. * Oversee catering and employee meal service operations, including vendor coordination, service quality monitoring, issue resolution, and continuous service improvement. * Oversee workplace and office administration activities, including space planning, seating and office layout management, common area management, office supplies, asset management, company mobile phone services, business card administration, and other General Affairs support. * Coordinate executive support, visitor support, and other administrative services as needed to support site and business operations. * Establish controls and tracking processes for visa, work authorization, assignment, passport, and other applicable expiration dates to support timely action and compliance. * Ensure immigration-related questions requiring legal interpretation or advice are appropriately referred to designated immigration counsel or authorized company representatives. * Serve as a primary liaison between U.S. operations, Korean headquarters, General Affairs, HR, site leadership, and other stakeholders regarding international employee, traveler, and General Affairs support. * Facilitate effective Korean-English communication between Korean-speaking employees, contractors, HQ stakeholders, and U.S.-based teams. * Establish and maintain appropriate records, trackers, procedures, and documentation for General Affairs activities. * Monitor General Affairs service needs, workload, and operational issues across locations and allocate resources or escalate issues as appropriate. * Partner with site leadership and other internal departments to identify General Affairs needs and implement effective solutions. * Ensure confidential employee, immigration, travel, and contractor information is handled and maintained appropriately. * Identify opportunities to improve General Affairs processes, service delivery, communication, and operational efficiency. * Support new site launches, expansions, special assignments, and other business initiatives requiring General Affairs coordination. * Maintain cleanliness at work-site in accordance with 5S3R Standards: * Sort, Set in order, Shine, Standardize, Sustain * Right Location, Right Quantity, Right Container * Perform other duties as assigned. Leadership Responsibilities: * Lead, coach, mentor, and develop General Affairs Specialists supporting each U.S. location. * Establish clear responsibilities, priorities, performance expectations, and service standards for the General Affairs team. * Manage team performance through regular feedback, goal setting, development planning, and performance management. * Assign and balance responsibilities across locations based on operational needs and workload. * Ensure General Affairs Specialists follow standardized processes while addressing location-specific business requirements. * Provide guidance and escalation support for complex employee, contractor, business traveler, FSE, and immigration-related administrative matters. * Promote effective collaboration and communication among General Affairs team members, site leadership, HR, HQ, and other business functions. * Identify staffing, training, and development needs to ensure appropriate General Affairs support across all locations Required Qualifications: * Bachelor's degree in Business Administration, Human Resources, International Business, Management, Communications, or a related field; or an equivalent combination of education and relevant experience. * 5+ years of progressively responsible experience in General Affairs, global mobility, expatriate support, human resources, international business operations, or a related function. * 2+ years of leadership, supervisory, or team management experience. * Professional bilingual proficiency in Korean and English, including verbal and written communication, required due to ongoing responsibilities supporting Korean-speaking employees, contractors, business travelers, and HQ stakeholders. * Experience supporting international employees, expatriates, business travelers, contractors, or global business operations. * Demonstrated experience developing or managing administrative processes across multiple teams or locations. * Ability to travel to supported U.S. locations as business needs require. Preferred Qualifications: * Experience working for a Korean-headquartered or multinational organization. * Experience managing General Affairs or administrative operations across multiple locations. * Experience supporting expatriates, FSEs, international assignments, or global mobility programs. * Experience coordinating employment-based immigration and visa processes with HR and external immigration counsel. * Experience managing or coordinating international contractors. * Experience working within a manufacturing environment. * Experience partnering directly with corporate or international headquarters. Skills & Competencies: * People leadership and team development * Korean-English bilingual communication * Cross-cultural communication * Multi-site operations management * Global mobility and expatriate support * Visa and immigration process coordination * FSE and international assignment support * Business travel coordination * Contractor administration * Process development and standardization * Stakeholder and relationship management * Problem-solving and escalation management * Organizational and time-management skills * Confidentiality and professional judgment * Project and priority management * Proficiency with Microsoft Office, including Excel, Outlook, PowerPoint, and Word Work Environment & Physical Requirements: * Work is primarily performed in office and manufacturing environments. * Regular interaction with employees, contractors, business travelers, site leadership, and global stakeholders. * Frequent use of computers, phones, and other standard office equipment. * Ability to sit, stand, and walk for extended periods as required. * Ability to navigate office and manufacturing areas while supporting employees and business operations. * Periodic travel to supported locations in Holland and Lansing, Michigan; Matteson, Illinois; and Phoenix, Arizona, as business needs require. * Occasional work or communication outside standard business hours may be required to support Korean HQ, FSEs, international employees, contractors, and business travelers. * Must comply with applicable safety requirements and use required personal protective equipment (PPE) when entering designated manufacturing areas.
Summary: As a Quality Manager, you will lead and develop the Quality team to ensure products and processes consistently meet customer, engineering, regulatory, and company requirements. You will drive continuous improvement initiatives, support production operations, oversee quality systems, and partner cross-functionally to achieve safety, quality, delivery, and cost objectives. This role is responsible for maintaining customer satisfaction, ensuring successful product launches, and fostering a culture of quality excellence throughout the organization. Responsibilities: * Lead, develop, and mentor Quality team members to achieve department and company objectives. * Drive quality improvement initiatives internally and externally to improve product quality, process capability, and customer satisfaction. * Partner with Engineering, Production, Maintenance, and Supply Chain teams to resolve quality issues and support operational performance. * Ensure products and processes meet customer, engineering, regulatory, and company requirements. * Lead Advanced Product Quality Planning (APQP) activities and support successful product and process launches. * Oversee implementation and maintenance of Quality Management System (QMS) requirements and quality control systems. * Utilize data analysis, statistical methods, and problem-solving tools to identify root causes and implement effective corrective and preventive actions. * Monitor and improve process capability, quality KPIs, scrap reduction, yield improvement, and customer quality performance. * Lead customer and supplier quality issue resolution, including containment, root cause analysis, corrective actions, and verification of effectiveness. * Ensure completion of Layered Process Audits, process audits, product audits, and quality system assessments. * Support customer visits, audits, and quality-related communications. * Review and approve quality documentation including Control Plans, PFMEAs, Process Flow Diagrams, Work Instructions, Inspection Standards, and PPAP documentation. * Drive continuous improvement through Lean Manufacturing, Six Sigma, and structured problem-solving methodologies. * Collaborate with global teams and headquarters to ensure alignment of quality standards and initiatives. * Develop and track departmental KPIs, providing regular updates to leadership. * Maintain cleanliness at the work site in accordance with 5S3R Standards: * Sort, Set in order, Shine, Standardize, Sustain * Right Location, Right Quantity, Right Container * Perform other duties as assigned Qualifications: * Bachelor’s degree required, MBA or MS preferred, or equivalent, relevant experience Experience: * 7+ years of Quality, Manufacturing, or Engineering experience within a manufacturing environment. * 3+ years of leadership experience managing quality teams, departments, or cross-functional initiatives. * Experience supporting high-volume manufacturing operations. * Experience working within a global manufacturing organization preferred. * Automotive, EV battery, electronics, or highly regulated manufacturing experience preferred. * Experience with customer-facing quality management and product launch activities preferred. Skills: * Strong leadership, coaching, and team development skills. * Ability to influence and communicate effectively at all organizational levels, including executive leadership. * Strong analytical, problem-solving, and decision-making capabilities. * Effective project management, prioritization, and organizational skills. * Experience with APQP, PPAP, PFMEA, Control Plans, Process Flow Diagrams, MSA, SPC, and capability studies. * Knowledge of quality inspection methods, metrology, and measurement systems. * Experience leading root cause investigations using 8D, 5 Why, Fishbone, and other structured methodologies. * Understanding of manufacturing processes, process controls, and continuous improvement principles. * Lean Manufacturing and Six Sigma experience; Six Sigma Green Belt required, Black Belt preferred. * Proficiency in Microsoft Office Suite and quality-related data analysis tools. * Ability to work flexible hours as needed to support production, global sites, and headquarters.
Position Summary: As a Defect Analysis Sr. Engineer, you will conduct analysis of BMS (Battery Management System) and other electrical components of a lithium-ion battery pack. You will also conduct reproduction experiments under certain conditions. This job is responsible for identifying the clear root cause of field issues, serving as a control tower to improve quality, and providing safe & reliable batteries to customers. Essential Responsibilities: * Organize and streamline processes/procedures * Create instruction and diagnostic manuals * Derive the root cause through on-site investigation, lab testing and teardown analysis * Analyze structural and design safety risks of automobile & battery system * Analyze the cause of defects through precision analysis equipment * Conduct a reproducibility experiment to verify the probable cause of a field issue * Maintain cleanliness at work-site in accordance with 5S3R Standards: * Sort, Set in order, Shine, Standardize, Sustain * Right Location, Right Quantity, Right Container * Perform other duties as assigned Required Qualifications: * Bachelor's degree in Electrical or Electronic Engineering, or a related field * 7+ years of BMS development work experience * Strong understanding of electrical and electronic circuits, including basic circuit theory and operating principles * Fundamental problem-solving skills related to electrical and electronic components and systems Experience: * Hands-on experience in electrical and electronic circuit analysis * Experience diagnosing circuit-level issues and performing root cause analysis * Experience working with BMS, power supply systems, sensors, and protection circuits * Experience in an automotive manufacturing environment or with EV/PHEV-related projects is a plus Skills & Competencies: * Comfortable working independently and with others * Results-oriented and perseverant * Critical thinking and problem-solving skills * Project and process management skills * Strong attention to detail * Technically proficient and motivated to continuously improve * MS office suite * Ability to work flexible hours occasionally to support related team * Electric & electronics related knowledge in vehicle Work Environment & Physical Requirements: * Work is performed in both office and manufacturing environments. * Regular interaction with manufacturing operations and cross-functional teams. * May require extended periods of sitting, standing, and walking throughout the facility. * Must be able to use required personal protective equipment (**PAPR**) when entering designated manufacturing areas. * Must be able to work a flexible schedule as needed to support manufacturing operations and meetings with global teams in different time zones.
Summary: The Defect Engineer I identifies battery cell defects caused by contamination and reduces them through equipment and procedural improvements. The individual in this role will drive a focus on quality and continuous improvement in our Li-ion battery cell manufacturing cleanroom. Responsibilities: * Implement improvements that reduce foreign particles using a structured problem-solving approach, such as Lean Six Sigma, including: 1. Using complex equipment such as scanning electron microscopes (SEM) 2. Identifying the root cause (source of contamination) in the production process 3. Designing, prototyping (including 3D printing), and piloting improvements 4. Verifying that improvements are effective 5. Standardizing improvements and communicating them with others, both in writing and verbally * Train production team members on best practices and process changes * Collaborate with other teams (e.g., Production, Quality, etc.) to resolve internal and external quality issues * Engage in weekly meetings with the production team to review and plan * Participate in large-scale planning or installation projects as needed * Analyze product failure data and laboratory test results to determine causes of problems and develop solutions * Aid in the design, testing, or control of processing procedures * Monitor material performance, and evaluate any quality issues * Conduct or oversee tests on raw materials or finished products to ensure their quality * Evaluate technical specifications and economic factors relating to process or product design objectives * Maintain cleanliness at the work site in accordance with 5S3R Standards: 1. Sort, Set in order, Shine, Standardize, Sustain 2. Right Location, Right Quantity, Right Container * Perform other duties as assigned Qualifications: * Bachelor’s degree required, MBA or MS preferred, or equivalent, relevant experience * Lean Six Sigma (LSS) certification Experience: * 0-3 years of experience in engineering problem-solving, with an emphasis on hands-on continuous improvement implementation * Materials and mechanical engineering * Manufacturing experience * Microsoft Office, especially Excel * CAD Design Skills: * Comfortable working independently and with others * Results-oriented and perseverant * Critical thinking and problem-solving skills * Project and process management skills * Strong attention to detail * Technically proficient and motivated to continuously improve Benefits Overview • 100% employer-paid Medical, Dental, and Vision premiums for you and your family • 100% employer-paid disability and life insurance • Employer-supported childcare/babysitting programs • Generous Paid Time Off / Holidays • Opportunity to grow in a diverse work environment with a global company • 401 (k) retirement savings and planning with generous company match
Timpl has partnered with an EV battery manufacturing company and is seeking for a Supplier Quality Manager. Summary The Part Leader/Manager is responsible for leading supplier quality teams to meet the requirements for the engineering, production, customer in a safe and timely manner. This position is responsible for driving world-class manufacturing performance by developing a talented workforce through planning, coordinating, and executing its manufacturing processes. The manager monitors supplier quality for the production performance of lithium-ion battery-related materials/products to ensure accurate, targeted volumes are produced at the highest quality and lowest cost while providing support to the company. Responsibilities: * Maintain cleanliness at the work site in accordance with 5S3R Standards: 1. Sort, Set in order, Shine, Standardize, Sustain 2. Right Location, Right Quantity, Right Container * Drive and support quality improvement efforts internally and externally * Results for this position will be measured by internal customer satisfaction and supplier metrics. * Respond to, and fully support, company plant production by ensuring all parts meet engineering requirements * Responsible for advanced product quality planning, and successful launch of components * Ensure that internal needs for Control Systems are established, communicated, and met in a timely and functional manner * Utilize analytical skill sets to implement root cause analysis and provide recommendations for corrective action * Optimize Process Capability on critical characteristics with in the quality team through effective application of statistical analysis techniques and Problem-Solving * Proactively work with suppliers to minimize and/or eliminate launch and ongoing quality/performance issues. * Conduct thorough and timely Layered Process Audits in appropriate work areas Qualifications: * Bachelor’s degree required, MBA or MS preferred, or equivalent, relevant experience * Must be Bilingual in Korean and English. * Ability to travel domestically and internationally. Experience: * Must have at least 3+ years of managerial experience in Manufacturing/Quality Assurance/Engineering in the Manufacturing industry or equivalent experience * Experience working in a large global manufacturing company, preferably automotive * Knowledge of 8-D’s, Fishbone Diagrams, 5–Whys, LSS Six Sigma, or other problem-solving tools. * Strong computer skills: MS Office. * Able to work flexible hours as needed to support and work with HQ and global sites * Complete daily documentation and audits, as required by position * Maintain 5S and 3R standards * Adhere to general and position-specific dress code requirements * Participate in, and successfully complete, any and all training requirements Skills: * Must have demonstrated knowledge of APQP, inspection equipment and techniques, root cause failure analysis, capability studies, statistical distributions, machine and assembly processes, problem solving, PFD/PFMEA/Control Plan, PPAP, 8D/5Why, team facilitation, and geometric dimensioning and tolerancing * Six Sigma Black Belt preferred, Green Belt required. * Data analysis skills * Must be able to excel in PowerPoint, pivot tables, equations, and plotting for data analysis * Experience with report writing in Microsoft Word and graphical analysis in Minitab strongly preferred. * Experience with Global Plant and Supplier Development a plus. * MS Office and Minitab * Ability to work flexible hours as needed to support and work with HQ and global sites Benefits Overview * 100% employer-paid Medical, Dental, and Vision premium for you and your family * 100% employer-paid disability and life insurance * Employer-supported childcare/babysitting programs * Generous Paid Time Off / Holidays * Opportunity to grow in a diverse work environment with a global company * 401 (k) retirement savings and planning with generous company match
Timpl has partnered with an EV battery manufacturing company and is seeking for a Production Manager. Summary: A Production Manager leads and guides floor operation members to produce accurate, targeted volumes for internal and external customers while meeting standards of safety, quality, and cost. You will maintain accountability, discipline, and positive morale in a dynamic, growing environment. Responsibilities: * Manage production and rework processes * Maintain a safe and environmentally compliant working area * Conduct daily morning meetings, review production and yield goals, quality data, inventory, and company news with team and upper management * Monitor and plan daily staffing status and prepare a short-staff backup plan, communicating with off-shift teams as needed * Manage incident reports, safety alerts, and safety training for new employees and visitors * Lead VIP tours of the department * Schedule and present at monthly department meetings * Manage hiring, retention, evaluation, promotion, and termination of hourly employees * Coach and develop the careers of SPVs, crew leaders, and operators * Conduct monthly 1-on-1 interviews with direct reports * Maintain good morale and a positive working environment * Ensure documentation with the state is updated through the internal document control system * Monitor spec sheets and quality samples * Manage quality issues, root causes, and corrective actions * Ensure KPIs are up to date and communicated * Conduct production planning * Submit electronic approvals (EAs) for invoices, parts orders, and organizational changes * Conduct thorough and timely Layered Process Audits in appropriate work areas * Maintain cleanliness at work-site in accordance with 5S3R Standards: * Sort, Set in order, Shine, Standardize, Sustain * Right Location, Right Quantity, Right Container * Perform other duties as assigned Qualifications: * Bachelor’s degree required, MBA or MS preferred, or equivalent, relevant experience Experience: * 7 to 10+ years of experience in complex mechanical assembly, tooling, and manufacturing in a highly automated setting * 3 to 6+ years of experience leading and managing multiple processes * Experience with large production lines and floor management * Experience implementing 5S principles preferred Skills: * Comfort around higher management * Ability to deal with ambiguity and make sound decisions * Effective workflow and process management * Planning skills and effective communication of priorities * Delegation and directing teams to meet goals * Ability to work flexible hours as needed to support entire production team